• - 交流-直流(AC-DC)控制器和稳压器
• - 直流-直流(DC-DC)控制器、转换器和稳压器
• - 电压和电流管理
• - 通讯IC
• - 驱动器
• - 热管理

• - 时钟及数据分配
• - 标准逻辑

• - 放大器和比较器
• - 模拟开关
• - 数字电位计
• - 接口
• - EMI和RFI滤波器

• - EEPROM存储器
• - 非易失性只读存储器(NVRAM)
• - SRAM存储器

说明

The TLK2201B and TLK2201BI gigabit ethernet transceivers provide for ultrahigh-speed full-duplex point-to-point data transmissions. These devices are based on the timing requirements of the 10-bit interface specification by the IEEE 802.3 Gigabit Ethernet specification. The TLK2201B supports data rates from 1.0 Gbps through 1.6 Gbps and the TLK2201BI supports data rates from 1.2 Gbps through 1.6 Gbps.

The primary application of these devices is to provide building blocks for point-to-point baseband data transmission over controlled impedance media of 50 . The transmission media can be printed-circuit board traces, copper cables or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

特性

• 1 to 1.6 Gigabits Per Second (Gbps) Serializer/Deserializer (TLK2201B)
• 1.2 to 1.6 Gigabits Per Second (Gbps) Serializer/Deserializer (TLK2201BI)
• Low Power Consumption <200 mW at 1.25 Gbps
• LVPECL Compatible Differential I/O on High Speed Interface
• Single Monolithic PLL Design
• Support For 10 Bit Interface or Reduced Interface 5 Bit DDR (Double Data Rate) Clocking
• Receiver Differential Input Thresholds 200 mV Minimum
• Industrial Temperature Range From -40°C to 85°C (TLK2201BI)
• IEEE 802.3 Gigabit Ethernet Compliant
• Advanced 0.25 µm CMOS Technology
• No External Filter Capacitors Required
• Comprehensive Suite of Built-In Testability
• IEEE 1149.1 JTAG Support
• 2.5-V Supply Voltage for Lowest Power Operation
• 3.3-V Tolerant on LVTTL Inputs
• Hot Plug Protection
• 64-Pin VQFP With Thermally Enhanced Package (PowerPAD™)

PowerPAD is a trademark of Texas Instruments.